ONKYO

Hi, I have a onkyo TX-8050 and I'm using the UWF 1 for the internet connection. STH is wrong because every time i go to vTuner the message appears: NO ITEM. And when I try to update firmware vie network, the message DNS Error appears and the receiver freezes. Any idea? Thank you, DB

i have an Onkyo HT-RC360 receiver and the UWF-1 WiFi adapter (and also using the onkyo remote control app for android)... after working fine for a while now i can not get it to connect. when plugging it into the USB port of the receiver i get "now initializing" and then "no storage" and that's it...what's wrong? how can i see if the UWF-1 is 'alive'?

Hello!Im using a Onkyo 609 Surround Reciever and I'm tryin to connect to my WiFi using the UWF-1. The receiver detects the wireless network and the signal is fine but it does not connect. My router is a Apple Time Capsule. Please help or advice!

can i stream music from the ipad to onkyo tx nr 3009 with a uwf-1 usb adapter? using spotify on the ipad ? How to do it.?

Will the UWF-1 work with HT-S6505?

Hi, I have a onkyo TX-8050 and I'm using the UWF 1 for the internet connection. Everything is working fine, but the almost everytime I start the onkyo the internet connection is lost (for using spotify and vTuner internetradio). Then i have to go to USB and do a 'refresh'. After one or two 'refreshes' it goes back to work. Sometimes, when I listen a while to spotify or vTuner (vTuner messages 'cannot play'), the internetconnection 'disconnects' and then I have to do a refresh again. Can this be fixed in any way??? Thx in advance!

Hi Onkyo,I have some questions regarding the UWF-1 wireless adaptor (European model if that is important):1) Is it compatible with the TX-NR818 receiver (European model again)?2) On the above receiver can it be installed on either the front or the rear USB ports?3) It is stated on your website that the UWF-1 does not work with networks with a hidden SSID. Does this mean that the SSID needs to be broadcast at all times for the UWF-1 to work, or does it only need to be broadcast during initial connection to the network, and then could be hidden afterwards and still allow the UWF-1 to operate?Thanks

Hi, I've got the UWF-1 setup on the nr818 without a problem, but there seems to be some streaming issues with my device? Simfy as well as streaming from a local device on the network causes stuttering, with Simfy regularly buffering. Aupeo seems to work better, but this might be due to the lower audio quality it streams (<192kbps). Other local devices streams simfy fine on the receiver. The receiver is located +- 8m from a 300Mbps type n router with clear line of sight. Is there any way of improving the streaming to stream without buffering? Will a wired network connection work better?

I'm trying to connect my Onkyo TX-NR818 - a great receiver - to my home network using the UWF-1. Before starting I updated the receiver to the latest firmware, removed all special characters from the Wifi password (read that here), but still no luck. The Wifi uses WPA2PSK security. When I disable all security I can connect to the network, but I can't connect to any resource that requires a password, like spotify. Please advise

Onkyo team. I am having issues with my TX NR609 amplifier. I recently purchased a UWF-1 wifi adapter but I just cant not get it to connect to my wi fi network. I have seen the video posted which shows how to do that. I go into usb mode, it detects my wifi access point, i input the password....and thats it. It just goes into 'connecting' mode and the whole amp freezes after that. infact I have to power the amp down to get it to work again. Please advise possible solutions. Ive tried it a number of times but it seems to me a failed purchase of a wifi router.